Victory Motorcycle Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 · (Edited)
Does anyone know of any bolt-on crash bars for my 2002 v92 deluxe the LINDBY CUSTOM INC website list a linebar for a 98-2001 and nothing anywhere that I can find for the 2002. Any help will be helpfull. Also I would be willing to slightly modify some bars. But I dont wont to have to completly refabricate.http://www.lindbycustom.com Does anyone know if the is a huge difference in the from or some reson this paet would not work? DS190179 Lindby Linbar Highway Bars with Footpegs
for V92C '99-01.....Talked to lindby mfg. yesterday they tell me that the bars that they make for the 99-01 will work on my 02 because the frame is the same.However I would have to relocate my oil cooler because victory had change its position in 2002 hope this helps some one else.
 

·
Registered
Joined
·
12 Posts
The crash bar for 99-01 will not work. Those are a one piece, the one you need are two piece. One for each side. That way yu do not have to move anything. I have check my parts and I do not have any.
 

·
Premium Member
Joined
·
53 Posts
If you find a set, let me know where also..I'm looking for a set for 2002 Deluxe Cruiser.
 

·
Registered
Joined
·
11 Posts
I went to the dealer and ordered the bars for the 2002 TC. Had them in a week. You will need to purchase the 4 spacers and 4 longer allen head screws. Bolt on was fast and painless, 20 minutes if that, around $350 for everything. I found everything from the Victory link below. Bars fit from '02 to '06. I make rain gaurds if anyone is interested.

http://www.rockymtncycleplaza.com/fiche_select1.asp?cat=Motorcycles&mfg=Victory
 

·
Registered
Joined
·
55 Posts
Highway bars

Does anyone know of any bolt-on crash bars for my 2002 v92 deluxe the LINDBY CUSTOM INC website list a linebar for a 98-2001 and nothing anywhere that I can find for the 2002. Any help will be helpfull. Also I would be willing to slightly modify some bars. But I dont wont to have to completly refabricate.http://www.lindbycustom.com Does anyone know if the is a huge difference in the from or some reson this paet would not work? DS190179 Lindby Linbar Highway Bars with Footpegs
for V92C '99-01.....Talked to lindby mfg. yesterday they tell me that the bars that they make for the 99-01 will work on my 02 because the frame is the same.However I would have to relocate my oil cooler because victory had change its position in 2002 hope this helps some one else.[/quote]

Check out this link, and if this is what you need I think I can help you (and me) out. [url]http://www.temeculamotorsports.com/fiche_section_detail.asp?section=242804&category=Motorcycles&make=Victory&year=2002&fveh=5760[/url] If this is correct, send me a message at bill dot moore at agmd dot org and we can see if we can make a deal.
 
1 - 5 of 5 Posts
Top