Victory Motorcycle Forum banner

1 - 20 of 27 Posts

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #1
Just had to show these off to you all. I've been wanting these boards since the first time I saw them and was finally able to get them. Big Blue, my XC, was practically preening after I shined 'em up with the Metal Gloss shiner and sealer Will and others sell. Good stuff for sure. The pic of 'em on the green cutting mat is before shining 'em up. The rest are after. :D The 1851 Navy Black Powder revolver was a gift from a friend. Thought I'd throw it in and show it off at the same time. thumb upcheers

Also shown are a primary cover, cam cover, and clutch arm cover from Will at Cycleops as well. Will's work is impeccable as most of us already know.

The red bolts and cup washers are from Witchdoctors if anyone was wondering.

The heat shield is my creation but I want to improve it some more. It's larger and covers more of the gap behind the rear cylinder than the standard shields I've been making.






 

·
Registered
Joined
·
634 Posts
Everything is looking good, for sure. Nice touches all around. Gray panels on the seat?
 

·
Registered
Joined
·
1,499 Posts
Looking good BBob!!!!
 

·
Registered
Joined
·
1,858 Posts
Now you've gone and done it! Those red bolts are "calling my Red Ness'es name"... goes to search witchdoctor site to tag and send to my wife as a Christmas present idea...
 

·
Registered
Joined
·
112 Posts
Floor boards look good. How much difference in size compared to the stock boards? Any change in ground clearance during turns?

Also, really like the heat shield I purchased from you. The new one you have looks like it will push even more heat away from your legs. Keep up the good work.
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #7
Everything is looking good, for sure. Nice touches all around. Gray panels on the seat?
Thanks everyone!

Yeah. The panels turned out to be a light gray or silver. I asked for silver and was expecting a much darker silver.

I'm thinking of having the gray/silver panels changed out by a local upholstery place with red to go along with the various red highlights I am installing along with the new red V badges for the tank. This shade of blue and red look good together I think.

At some point in the not too distant future I also want to incorporate some red paint onto the tins. Not too much though. Just enough for highlights and contrast. More than pin striping but not a whole lot more. :) I'm a simple guy so I'm not really into really busy paint jobs. I want to do it myself if I can learn the skills. I have already invested in the paint tools to do it. Just need to practice some before I go after doing Big Blue.

You all know how it is. You start out in one direction and somewhere along the way it takes on a life of its own so it ends up different from the original idea.
 

·
Premium Member
Joined
·
489 Posts
Damned Man, that is one sweet-looking sickle! I have got to get some of those floorboards! Have the Cycleops cheese and waitin for delivery of the other engine plates too... His work is amazing!

Anyway, nice bike and nice tank badges-i went with those too.... :)


Sent from my iPhone using Motorcycle.com Free App
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #9
Floor boards look good. How much difference in size compared to the stock boards? Any change in ground clearance during turns?

Also, really like the heat shield I purchased from you. The new one you have looks like it will push even more heat away from your legs. Keep up the good work.
Hey thanks!

They are about the same size as far as foot position I think. There may some difference in ground clearance but I don't push the big bike too hard into the curves. I did have one scrape mark under the stock floorboards but that was about it.

Glad you like the heat shields. I hope to improve on them over time. I just wish I could make them easier to install. Lots of folks have a bit of trouble getting the tank lifted and stuff. Then again maybe they will see how easy it is to do and when it's time to clean or replace the air filter; they won't be intimidated by it and feel a need to take it in to the shop for basic stuff like that.
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #10
Damned Man, that is one sweet-looking sickle! I have got to get some of those floorboards! Have the Cycleops cheese and waitin for delivery of the other engine plates too... His work is amazing!

Anyway, nice bike and nice tank badges-i went with those too.... :)
Thanks much BT! I like these tank badges too but when the new ones came out I knew I had to have them. Thing is I have no idea when they will be available to us regular peons. :D

Yeah. Will does some amazing work for sure. The guy is totally anal about perfection and it shows in his work and even the work he farms out because he won't let anything leave his shop without his stamp of approval. ;)

Big Blue gets closer to being done every year. It usually takes me 3-5 years to get a bike to where I want to keep it if it's a keeper to start with. This XC is definitely a keeper. I've had her for about 2.5 years now so it's getting close.
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #12

·
Registered
Joined
·
634 Posts
Bob, what wheel do you have on there?
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #14
Bob, what wheel do you have on there?
Those are the stock wheels that have been chromed. Sure makes a difference doesn't it! If you go that route; make sure you chrome the pulley too. It shows up more than the rear wheel.

I think it was $700 to do all 3 which is a heck of a lot cheaper than buying 2 wheels and a chrome pulley. Like $2k+ less.
 

·
Premium Member
Joined
·
489 Posts
Thanks much BT! I like these tank badges too but when the new ones came out I knew I had to have them. Thing is I have no idea when they will be available to us regular peons. :D

Yeah. Will does some amazing work for sure. The guy is totally anal about perfection and it shows in his work and even the work he farms out because he won't let anything leave his shop without his stamp of approval. ;)

Big Blue gets closer to being done every year. It usually takes me 3-5 years to get a bike to where I want to keep it if it's a keeper to start with. This XC is definitely a keeper. I've had her for about 2.5 years now so it's getting close.
Those new badges should look good with your color scheme! What material is the black section of those floorboards made out of? Are they slippery when wet? :)



Sent from my iPhone using Motorcycle.com Free App
 

·
Registered
Joined
·
27 Posts
Thanks much BT! I like these tank badges too but when the new ones came out I knew I had to have them. Thing is I have no idea when they will be available to us regular peons. :D

Yeah. Will does some amazing work for sure. The guy is totally anal about perfection and it shows in his work and even the work he farms out because he won't let anything leave his shop without his stamp of approval. ;)

Big Blue gets closer to being done every year. It usually takes me 3-5 years to get a bike to where I want to keep it if it's a keeper to start with. This XC is definitely a keeper. I've had her for about 2.5 years now so it's getting close.
Your pics really got my heart racing BBob, especially those great-looking boards.thumb up And here I thought I was done stockpiling new stuff for spring install - I gotta stop reading these forums.
Just wondering - are your boards the black finish or the chrome finish, and were they a pretty straight forward replacement for the stocks?
Thanks for sharing your pics.
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #18
Oh yeah, they are the contrast cut, not the straight chrome ones.

Very simple install. Straighten cotter pin, remove, remove shaft holding board on, reverse order when installing but leave off the springs.

I know what you mean. It can get expensive really fast with all the cool stuff available these days. Wasn't always that way with the X bikes but sure is now.
 

·
Registered
Joined
·
827 Posts
Bbob


Those running boards are SO pretty I wouldn't want to put my boots on them. Very Nice

Is you brake arm a 1 piece or does the pedal attach to the arm?
 

·
Premium Member
Joined
·
13,728 Posts
Discussion Starter #20
Is you brake arm a 1 piece or does the pedal attach to the arm?
It's an L bracket bolted to the brake arm and the Kury pad bolted to the L bracket. I guy on another forum made a few a couple years ago and I snagged one.
 
1 - 20 of 27 Posts
Top