Victory Motorcycle Forum banner

1 - 18 of 18 Posts

·
Registered
2004 Victory Vegas & 2013 Victory Boardwalk
Joined
·
9 Posts
Discussion Starter #1
I need to calibrate the TPS on my '04 Vegas. I'm in Flower Mound, Texas (north of Dallas). Does anyone know of a shop in this area that has the Digital Wrench software? Thanks in advance!
 

·
Premium Member
Joined
·
13,699 Posts
Check out this thread to see if you can do it yourself.


How to do a manual TPS reset:

Key on, switch on, engine off
Slow 5 count rotate throttle from closed to wide open
Hold throttle wide open for slow 5 count
Let throttle SNAP shut/closed
Cycle kill switch (off then on)
Start bike, and enjoy the ride
 

·
Registered
2004 Victory Vegas & 2013 Victory Boardwalk
Joined
·
9 Posts
Discussion Starter #3
Check out this thread to see if you can do it yourself.


How to do a manual TPS reset:

Key on, switch on, engine off
Slow 5 count rotate throttle from closed to wide open
Hold throttle wide open for slow 5 count
Let throttle SNAP shut/closed
Cycle kill switch (off then on)
Start bike, and enjoy the ride
Hey BBob, Sorry, I should have clarified. I need to calibrate the throttle position sensor which can only be done with Digital Wrench. I've done the throttle point reset already. Thanks!
 

·
Premium Member
Joined
·
1,602 Posts
Strokers Dallas may still have theirs.
 

·
Registered
2004 Victory Vegas & 2013 Victory Boardwalk
Joined
·
9 Posts
Discussion Starter #5
Thanks NOEMTZ!!! I called and they do still have it. I'll let everyone know if TPS calibration solves my problem!
 

·
Premium Member
Joined
·
1,602 Posts
If they cannot help. I still have mine.
 

·
Premium Member
Joined
·
13,699 Posts
If they cannot help. I still have mine.
Is that something you can do over the phone or online or does it need to be physically plugged into the bike at your shop? Can the sensor be sent in for calibration?
 

·
Registered
2004 Victory Vegas & 2013 Victory Boardwalk
Joined
·
9 Posts
Discussion Starter #8
If they cannot help. I still have mine.
Good to know! You're about 4.5 hours from me though. If it can be done remotely like BBob suggested then that would be awesome.
 

·
Premium Member
Joined
·
1,602 Posts
No it cannot be done remotely. Needs to physically be plugged in.
 

·
Premium Member
Joined
·
1,602 Posts
No
 

·
Registered
2012 Victory Cross Country Tour, Indianapolis
Joined
·
1,663 Posts
Is it not the same software for Indians and other Polaris things?
 

·
Premium Member
Joined
·
1,602 Posts
Same software. Polaris Digital wrench covers Indian, Victory, slingshot ranger Atv/utv side by sides.
 
  • Like
Reactions: NAB

·
Premium Member
Joined
·
13,699 Posts
Same software. Polaris Digital wrench covers Indian, Victory, slingshot ranger Atv/utv side by sides.
Well that helps a bunch if these shops are willing to put a Victory on their machine to program them. Plenty of Polaris dealerships around; far fewer Indian dealerships but a heck of a lot more than Victory dealerships.

I wonder how many Victory dealerships, if any, are still open besides Strokers of Dallas. Any idea Noe?
 

·
Premium Member
Joined
·
1,602 Posts
In Dallas area. Freedom Powersports. In Houston Mancuso Powersports.
 
  • Like
Reactions: BBob

·
Premium Member
Joined
·
2,244 Posts
Family Powersports in Lubbock, Odessa, San Angelo.
 

·
Registered
2012 Victory Cross Country Tour, Indianapolis
Joined
·
1,663 Posts
Is there a list online?

Flat out in Indy still has the Victory on side of building but they could never sell them when new. Same one there that was there two years ago never rode. Still overpriced but now classified as used from age with no miles.
I've read horror story reviews online so I would never go there for anything other than browsing. Went there to look at the Challenger.
 
1 - 18 of 18 Posts
Top