Victory Motorcycle Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi, doing some work on my bike with most of my tools in another province. Can anyone tell me the size of the nut holding on the drive sprocket on a 02 V92 TC?
 

·
Registered
Joined
·
190 Posts
48mm or the 1 7/8" will work. Torque is 125 ft. lbs with 262 loctite. Heat the nut with a heat gun to soften the factory loctite, then it should come apart pretty easily.
 
1 - 3 of 3 Posts
Top