[Mac Daddy Sexton]

whats up guy's , bought an 08 vision tour premium w/ 10,000
miles, sometimes at idle or slow speed the engine surges, between
1.5 rpm to 2.5 rpm's, has this happened to any other Vision's
Thanks, mac D

 

[diamondrmp]

Sounds like you need a reflash. Take it to the dealer. There were some Visions with this problem and the reflash took care of it.

 

[FLEONE1]

Diamond concerning surging

i have a new 09 VV Tour, 700 miles. I have noticed when I'm using cruise (quite often) if I am climbing a small grade, the bike throttles up and down several times to reach the set speed. My 02 BMW KLT didn't do that. Is there a fix? Thanks, Frank

 

[kevinx]

i have a new 09 VV Tour, 700 miles. I have noticed when I'm using cruise (quite often) if I am climbing a small grade, the bike throttles up and down several times to reach the set speed. My 02 BMW KLT didn't do that. Is there a fix? Thanks, Frank

On your bike you need to do the lash learn proceedure for your cruise. I believe it is outlined in the owners manual

For the OP's surge I would guess that if he is riding down to 1500RPM he is getting a surge from the torque compensator loading, and unloading. 2K is something you pass through on a Vic, and not ride at

 

[FLEONE1]

lash learn?

When I get home (4/20) I'll check the manual. I believe I was over 2k RPM, I was on the highway approx 70 MPH. Thanks for the response, Frank