Victory Motorcycle Forum banner

21 - 22 of 22 Posts

·
Registered
Joined
·
16 Posts
Thanks for the replies. I'm not real sure on the local dealer on parts. What I've read taking the forks apart to change the seals will possibly damage the bushings. I don't thinks the forks are bad but I'd have to get so far then have to wait for parts. I'm new to this if you haven't guessed. So the more I can learn before I get into this I'm sure the better it will go.
 

·
Premium Member
Joined
·
6,037 Posts
When i did my jackpot i had blown seals, so i had to do a rebuild, but if the forks are not leaking then i will do the following,

1. As per video drain oil from top-cap only

2. Fill half oil and pump, and drain again

3. Fill as per speck but measure the mm from top of forks also

4. Install top-cap and RIDE AGAIN

Andre using TaPaTaLk
 
21 - 22 of 22 Posts
Top