Victory Motorcycle Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,347 Posts
Discussion Starter #1
Does anybody have a copy of the instructions that come with the Victory GPS. I'm mostly interested in the routing of the wiring from bars to inside fairing?

Thanks in advance.
 

·
Registered
Joined
·
1,493 Posts
I have three different sets of instructions that I can email to you. PM me your email address and I will do so. None of them really show route of the wiring. I have the mount installed on the right handlebar of two 2012 XCT bikes. On both, the wire leaves the mount on the "wrong" side of the mount - that is, on the outboard side. I routed the wire as follows: Bent straight down to go under the mount and then wire tied to the electrical wires under the handlebar. The Zumo mount wire continues to be wire tied to the stock wires all the way into the fairing at which point it breaks off from the stock wire bundle and attaches to the stock Zumo mounting connector in the fairing.

G'day,

Vinish
 
1 - 2 of 2 Posts
Top