Victory Motorcycle Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I found that the memphis shade bracket part number 2321-0020. Works great on a gunner. Im running it with the pop top and it looks great. Hope this helps somebody.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #4
sorry it was dark when i posted and im at work now i will try to get a decent pic posted after work. also another note is to use the 9" cutout on the sport shields.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #6
I didnt make any modifications to the brackets. Its the same brackets that Memphis shades says to use for the vegas.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #8
i have added an album to my profile called pop top everyone should be able to see it. i havent figured out to attache it to my post.
 

·
Registered
Joined
·
116 Posts
I ended up bending them and then it has hitting the Speedo. I gave up on the whole thing and bought the lock and ride. Good job!
 

·
Registered
Joined
·
13 Posts
Discussion Starter #10
thanks i didnt bend them they have a slight inward tilt on the fork tubes no more than 10 degrees and it clears the speed by about 1/4 inch. i really like this set up though.
 

·
Premium Member
Joined
·
8,967 Posts
@p_a_guy, just out of interest, how wide are your gunner forks?
Measured from extreme outer on the upper tubes?
Not triple clamps or legs but the actual fork tubes.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #12
13.25" from the outside of the tubes
 

·
Premium Member
Joined
·
8,967 Posts
Ok well Victory has introduced a 'wide glide front' without any fanfare!
My Vegas measures 11.75"
 
1 - 14 of 14 Posts
Top