Victory Motorcycle Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
Was loooking to put the ram mount clamps on...anyone know the size allen wrench fits the bolts its giving me issues and I don't want to mess anything up.
 

·
Moderator
Joined
·
13,177 Posts
Whats a ram clamp what does it look like what does it do :confused:
 

·
Registered
Joined
·
2,699 Posts
Not sure about the size but I know there's one in the tool kit that came with your bike.
 

·
Registered
Joined
·
12,296 Posts
Was loooking to put the ram mount clamps on...anyone know the size allen wrench fits the bolts its giving me issues and I don't want to mess anything up.
Look to see where it was made. If it was made here in the good old US of A, then it would more than likely be an SAE size allen wrench. If it was made offshore, then it'll take a metric size. Didn't one come with the mount? :confused:
 

·
Registered
Joined
·
37 Posts
Discussion Starter #5
sorry

Im sorry I should have been more specific the ram mount system is made to mount items like a gps cup holder etc.....the piece replaces the bottom clamp tthat holds on your clutch lever for example
 

·
Registered
Joined
·
381 Posts
Sorry... no help here. My ram mount has an external clamp with metric nuts. You should be able to take the mount to your toolbox (or nearest tool store) and find an allen wrench that fits properly with absolutely no wiggle.
 

·
Registered
Joined
·
381 Posts
Not sure what model you ride but my XC does not have an allen bolt holding on the clutch lever. It has a small nut AND I found that a 9mm is too small, a 10 mm is too big, a 3/8 is too small and a 7/16 is too big. WTF? I looked in the manual and although it showed the nut and the torque setting it doesn't have the size. Call the dealer? I haven't got a clue.
 
1 - 9 of 9 Posts
Top