Victory Motorcycle Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
yesterday i got the idea to tilt my stock handle bars forward, giving the allusion of ape bars.
i could loosen brake/mirror brakets and rotate them but when i loosened screws on controls they would not turn upright like the mirrors.
Am i missing something?
maybe the are just (stuck)? afterall they would have to come off if changing grips.

thanks
 

·
Registered
Joined
·
132 Posts
There is a peg on the controls that fits into a hole in the bars so the entire unit doesn't turn when you hit the throttle. If you are turning them enough you can drill another hole.
 

·
Premium Member
Joined
·
6,033 Posts
Cut the aluminium peg off and set as you please ... Then tighten the Alan-bolts and RIDE ...

Nobody redrilling the holes into a handlebar ..

Sent from my A51w using Tapatalk
 

·
Registered
Joined
·
1,365 Posts
Cut the aluminium peg off and set as you please ... Then tighten the Alan-bolts and RIDE ...

Nobody redrilling the holes into a handlebar ..

Sent from my A51w using Tapatalk
DITTO! That's what I did.
 
1 - 5 of 5 Posts
Top