Victory Motorcycle Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter #1
My better half rides a 08 hammer. She is only 5`2, so I lowered the bike for her, and she reaches the ground just fine. Nowl, she would like a little shorter reach to the bars. Suggestions for the best and cheapest way to do this? Looked into a pair of risers, since the hammer bars have none, and thinking of heritage style mini apes. Anyone tried these?
 

·
Premium Member
Joined
·
6,215 Posts
I think i read a tread from a Jackpot a guy was pretty short and he installed some pull backs and did the trick .... Sorry for not remembering more details
 

·
Registered
Joined
·
365 Posts
Just put some 5" risers on my Vegas (std were 3") and its better,could have gone for 6" mind. Be careful on the bolts front,the ones I had off ebay didnt come with mounting bolts,I assumed these were 12mm and nearly stripped the threads,they were 1/2" unc x3" long required.
 

·
Registered
Joined
·
1,399 Posts
kapscomoto risers

i put 3.5" pullback risers on my 13 hammer for cheap, easily installed with 1/2 X 13 bolts from under the top "tree". longer ones available but was concerned with cable lengths. here's a pic
 
1 - 4 of 4 Posts
Top