Victory Motorcycle Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter #1
I need some help .

I have an 07 victory hammers s

noticed saturday taht my front brake line ( master cyl to triple tree) had appeared to be melted... It seemed as if it was pulled awful tight so i figured that it it just tore and seeped brakefluid into the vinyl covering casuing it to "melt"...

Boy was i wrong... Just put my new brakeline i had made on (1.5" longer) and noticed an arch at the master cylinder. I thought that this was weird but hooked it up anyway like an idiot. Then i felt it statrting to get hot and unhooked it....

Please help if anyone has seen this before to give me a direction to start in. Its really nice today and i want to ride.

Thanks in advance.

Jim
 

·
Registered
Joined
·
51 Posts
Discussion Starter #3
Problem solved!! After nearly going over the entire wiring harnes I found the issue. One of the orange ign switch wires were rubbed threw and was arching against the tps mounting bolt and next to the fuel rail. Thankfully the brake line was all that was damaged.

Thanks
 
1 - 3 of 3 Posts
Top