Victory Motorcycle Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
348 Posts
Discussion Starter #1
Hey everyone, as you may know I just bought a 2017 Vision and two things I want to add will be highway footpegs (as I am 6'4") and some LED driving lights that I want lower down on the front to form that triangle of light for oncoming vehicles.

Any thoughts on mounting these? On my Voyager XII I had the front crash bars to attach them to but the Vision does not have this in that location.
 

·
Premium Member
Joined
·
380 Posts
I've got Clearwater LED lights down low. Best thing about them is they come with a rheostat for adjusting the brightness (cause they are that damn bright), and go full bright when your brights are on. Totally worth every penny. They mount the same way as the Victory ones do.

I've used the Victory floarboard highway pegs but at almost 6'3" I found they spread my legs a little too far apart for long distance comfort. I went to something that isn't made anymore that attached to the underside of the tipovers that were AWESOME! I broke one off so I had to go to something else.

The Gonzo Garage has what I'm using now for highway pegs

 

·
Premium Member
Joined
·
1,737 Posts
I've got Clearwater LED lights down low. Best thing about them is they come with a rheostat for adjusting the brightness (cause they are that damn bright), and go full bright when your brights are on. Totally worth every penny. They mount the same way as the Victory ones do.

I've used the Victory floarboard highway pegs but at almost 6'3" I found they spread my legs a little too far apart for long distance comfort. I went to something that isn't made anymore that attached to the underside of the tipovers that were AWESOME! I broke one off so I had to go to something else.

The Gonzo Garage has what I'm using now for highway pegs


Damn bro.....I think the Vision is one ugly bike, but yours is freaking awesome! If that was sitting on the showroom floor, I'd be tempted to buy it!
 

·
Premium Member
Joined
·
380 Posts
Damn bro.....I think the Vision is one ugly bike, but yours is freaking awesome! If that was sitting on the showroom floor, I'd be tempted to buy it!
Thanks! This is the only Vision I would own. I hunted it down. A little old but a writeup I did when I bought it: http://www.victoryforums.com/16-victory-vision-forum/14417-now-i-dun-did-plus-my-1st-post.html

And a writeup on the trailer: http://www.victoryforums.com/16-victory-vision-forum/65169-my-bushtec-undergoing-ness-conversion.html

It's my baby. I ride the hell our of her but take perfect care of her. I can't imagine having something else.

Mike
 

·
Premium Member
Joined
·
1,737 Posts
Thanks! This is the only Vision I would own. I hunted it down. A little old but a writeup I did when I bought it: http://www.victoryforums.com/16-victory-vision-forum/14417-now-i-dun-did-plus-my-1st-post.html

And a writeup on the trailer: http://www.victoryforums.com/16-victory-vision-forum/65169-my-bushtec-undergoing-ness-conversion.html

It's my baby. I ride the hell our of her but take perfect care of her. I can't imagine having something else.

Mike
That is the way I was with my XCT. It sux that it is destroyed.

Sent from my SAMSUNG-SM-G870A using Tapatalk
 
1 - 8 of 8 Posts
Top