To Change Display Units
To change the odometer display from English
(miles & 12-hour clock) to Metric (kilometers and
1. With the key OFF, press and hold the MODE
2. Turn the key to ON or ACC.
3. Toggle (one quick tap)the MODE button to the desired screen display unit.
4. Press and hold the MODE button until the display returns to the TRIP computer.
Unless I'm moving up there or going to be like a month I aint changing it. My old RSV had both on it, I think US in white and metric in blue or something. Anywho blasting down the main highway my buddies and I are doing the speed limit, and we were getting blown away by big trucks and cars. But we maintained as we figured if anybody was gonna get dinged, it would be the gringos from down south. For the most part the main roads run at 3 speeds, I forget what they are now but like 60km on freeway 40 on side roads. So you could just go online at hotel or free wifi and get a conversion chart and remember or mark off where mph wise those are. If you cant figure out how to get it swapped over that is. Hell I have to read the manual twice a year just to set time.
Hi all, thank you ahead of time for helping me with my question. I'm looking at buying a 2011 Victory Cross Roads. It's a gorgeous bike and I love everything about it, however I didn't realize that the saddle bags weren't meant to be removed. I like everything about the bike except that I'd...
I have had my eyes on a Cross Country for a while now and finally decided to pull the trigger. Was able to lock in an 2016 with 2.5K miles and comes with 1 year warranty and just had all work completed and a new rear tired installed.
Also comes with Stage 1 Victory Tri-Oval...
I also frequent a Wrangler TJ forum - there is a thread similar to this there and it has 1,000s of responses. You can get ideas and learn from what others are doing with their toys - so, lets see if it works here...
I installed the 1/4 turn throttle from Lloyds. I did not find...
Yes , its true, how Kool🤣
after gutting out my mufflers on the 2010 XC, when I holesawed into tha back of them to enlarge the exit pipe after discovering I could sort of see through them,
Well there was minor baffling and fibreglass packing, which makes me think Ive gutted a set of Stage 1...
The shift linkage is very sloppy on my 2010 CR. Not only side to side but up and down. It's the up and down slop that bothers me.
The bushings that are offered are for 2011 and newer models with the round bushings. (the 2010 has hex bushings).
I checked a new bike in the show room and it was...