Victory Motorcycle Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
881 Posts
Discussion Starter #1
Looking for suggestions on where to locate a stebal horn on a 2011 8 ball
 

·
Administrator
Joined
·
5,947 Posts
Looking for suggestions on where to locate a stebal horn on a 2011 8 ball
Is it someone else's bike? Your signature says 2012 XR... Just wondering.
 

·
Registered
Joined
·
881 Posts
Discussion Starter #5
Is it someone else's bike? Your signature says 2012 XR... Just wondering.
Yes it's my ole lady's bike and she's picking thought bout putting where the original is but she's says it would hit the fender not gonna aurgue with her on it:D
 

·
Registered
Joined
·
185 Posts
Here's where mine went...screaming banshee..

Used heavy duty cable ties, drilled hole in casing and secured as tight as i could..been on for 6 or so months..works great

2011 Hammer 8 ball install

Derek cheers
 

Attachments

·
Registered
Joined
·
881 Posts
Discussion Starter #8
Thanks for the info had not thought bout pitting it under the engine
 

·
Registered
Joined
·
185 Posts
Nothing, on the Aus bikes that bracket is original, and not part of the installation for the horn.

I think it is a cover for the neutral switch or sidestand switch.

with respect to the horn installation, have also attached wiring for the banshee system. One thing i found as i retained the stock horn, was that i needed to fit a relay off the existing horn to drive the banshee horn which was supplied direct from the battery..

hope this helps..

Derek cheers
 

Attachments

1 - 10 of 10 Posts
Top