Lowering
1 - 3 of 3 Posts
I actually own a 2006 that was lowered when I bought it. I am a big guy (6'5 255) and the difference I noticed before I changed it back to factory original is I sometimes bottomed out going over bumps or around corners. This was even more apparent with my wife on the bike. I ended up going back to factory original.
I do still have the lowering links if you were interested. Let me know
I do still have the lowering links if you were interested. Let me know
Joined
·
4,001 Posts
A couple of thingsyou need to do when lowering your bike. Move the rear wiring harness to the side as it runs down the middle of the fender and can rip out when you bottom out. Also you need to set the preload on the shock.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
4th July ride
Victory General DiscussionMe and Wendy went out for a little ride to On the foothills parkway it was a good ride hardly no traffic at all- 2
- 41
-
rainman123 · updated
-
Load Equalizers (again)
Victory General DiscussionOk, I know this has been discussed in the past but I'm still confused... I purchased LED turn signals to replace the rear stock signals (for now). Kuryakyn part # 2527 from Kuryakyn. The instructions state "may need load equalizer" but does not give a part number. There is no amperage info of...- 8
- 92
-
Xpresswaykid · updated
-
custom vic chop from soggy UK
Victory General DiscussionHi all, thought I share a bit of info and hopefully some pics about my custom build here in England over here Victorys are pretty rare in comparison to a lot of bikes to me that seemed like a perfect choice of engine for a custom chop build as far as Im aware it is currently the only vic 106...- 79
- 4K
-
How much does tire presure grow
Victory General DiscussionSo how much does your tire air pressure rise? I have checked mine after a ride with a tire gauge and air pressure has only risen up 3 pounds.- 13
- 286
-
visionjohnny · updated
-
Heads up to 2010 CR Owners.
Victory General DiscussionI have been doing quit a bit of riding but for the last month or so I have had a loud clunking like rattle from the rear of the bike every time I hit a bump or rough road. As hard as I tried, I could not find the source of the noise. The other day I worked on the rear brake caliper, thinking it...- 4
- 198
-
Richie271 · updated
Join now to ask and comment!