Victory Motorcycle Forum banner

1 - 7 of 7 Posts

·
Moderator
Joined
·
12,984 Posts
bet you could buy all the bolts from the hardware store
figure out length and size
 

·
Registered
Joined
·
22 Posts
Fastenal if you have one around you would be the place to go. Should be able to do some research and find the bolt sizes you need.
 

·
Registered
Joined
·
539 Posts
You can go to about any parts dealer now and they will have a OEM parts breakdown for about every Victory there is. Although I looked at the one at my local dealer and it showed no breakdown for factory highway bars for a 2006 Hammer.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #6
Thanks to all of you that responded. Problem is Victory no longer carries the mounting hardware and there are straps for the downtubes that are required for mounting the highway bars. Fabricating these would not be very aesthetic. The rest of the hardware can be purchased or fabricated, but the mounting straps for the downtubes that support the top of the highway bars is my problem.

Al AKA Yellow Hammer
 

·
Registered
Joined
·
203 Posts
Try getting the P/N from the dealer and do a generic search for the # on google. Someone is bound to still have one.
Sent from Motorcycle.com Free App
 
1 - 7 of 7 Posts
Top