Victory Motorcycle Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Got my 2010 XR on 9th Jan and have now done my WISH LIST of upgrades...

VM OEM PARTS:
1. #2876571- Chrome Master Cylinder Cover
2. #2879912-266 Exhaust Crossover Cover, Black
3. #2877652- Tachometer Kit
4. #2878036- Driver Backrest (for the long trips)
5. #2877750- Cruise Control (for the long trips)
6. #2880358- Keyless Ignition/Alarm System
7. #2876145-015 Red Coil Leads

Non VM OEM Upgrades:
8. GMan Industries, BULLY FI Controller. http://www.gmanindustries.com/shop/pc/Bully-Victory-2008+-30p543.htm

Think that should just about do me for a while...
 

·
Premium Member
Joined
·
4,498 Posts
Timing wheel and Lloydz air are a must... I see you have a fuel controller listed. I am not familiar with that fuel controller, have you any experience with that brand?
 

·
Registered
Joined
·
450 Posts
Timing wheel and Lloydz air are a must... I see you have a fuel controller listed. I am not familiar with that fuel controller, have you any experience with that brand?
The GMan is another rendition of the Doebeck. I assume gen 3.
 

·
Registered
Joined
·
450 Posts

·
Premium Member
Joined
·
13,723 Posts
Got my 2010 XR on 9th Jan and have now done my WISH LIST of upgrades...

VM OEM PARTS:
1. #2876571- Chrome Master Cylinder Cover
2. #2879912-266 Exhaust Crossover Cover, Black
3. #2877652- Tachometer Kit
4. #2878036- Driver Backrest (for the long trips)
5. #2877750- Cruise Control (for the long trips)
6. #2880358- Keyless Ignition/Alarm System
7. #2876145-015 Red Coil Leads

Non VM OEM Upgrades:
8. GMan Industries, BULLY FI Controller. http://www.gmanindustries.com/shop/pc/Bully-Victory-2008+-30p543.htm

Think that should just about do me for a while...
As long as you are happy with it; that's all that counts!

Didn't the 2010's come with cruise control? Maybe the XR had an option for them.

You could have saved a couple bucks on the crossover cover with just a rattle can of of high temp black spray paint, about 2 minutes of shaking the can and 5 seconds of spraying with a piece of cardboard to shield the rest of the exhaust.

I like the red plug wires too. Gives it a little contrast under the tank and in the motor area.

My dang Vic's are so reliable and need so little maintenance; I sometimes forget to do what little they do need. :)
 

·
Premium Member
Joined
·
107 Posts
Welcome Cobb,

If you're adding a fuel controller anyway, I would certainly encourage you to add the Loydz Air Filter and Adjustable Timing Wheel. The crossroads is a nice machine. Congrats!

http://buywitchdoctors.com/p/1780/victory-motorcycle-parts-fuel-performance-featured-xcxr-filter-sc-785/

http://buywitchdoctors.com/p/2971/victory-motorcycle-parts-power-packages-performance-featured-timing-gear-gasket-sc-781/

AGREE, AGREE, AGREE!! Had mine 11 months and just did the timing wheel/air filter on my XC. Best money for mods out there!! I have the PCV. Runs like a beast!!! Good luck to you. Enjoy all that "What kinda bike is that??" comments!!
 

·
Premium Member
Joined
·
229 Posts
I have to agree with most on here that Lloydz timing wheel is an absolute must!!! But dont forget the 1/4 turn throttle. Both of these mods should be installed in the factory!thumb up
 

·
Registered
Joined
·
477 Posts
I don't own an xc but the timing wheel is definitely worth it!
 
1 - 8 of 8 Posts
Top