Victory Motorcycle Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
4,078 Posts
Discussion Starter #1 (Edited)
Can undamaged, new clear-coat be painted over or does it have to be "prepped" somehow?
 

·
Premium Member
Joined
·
1,501 Posts
I would think scuff and go just like any other clear. Vic's clear is solvent based. I'm NOT a painter though.
 

·
Registered
Joined
·
4,078 Posts
Discussion Starter #4

·
Moderator
Joined
·
13,188 Posts
wet sand with 180 or 2000 grit with "wet sandpaper" is not the same as normal sandpaper. Now put down a coating of primer then paint.
Look on youtube how to
 

·
Registered
Joined
·
1,071 Posts
i hope you meant 1800 grit , not 180. 1000 grit would be ok,
just make sure its thoroughly deglossed . even a grey 3M
scuff pad would work. 2 coats of clear should be plenty.
i use ppg products at my place.
 
1 - 6 of 6 Posts
Top