Victory Motorcycle Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
167 Posts
Discussion Starter #1
I don't know what they are called but I have several friends who's passenger floorboards have adjustable passenger pegs that attach to the passenger floorboard and allows the passenger to straighten their legs out or move their feet to another position. In Kuryakyn it is part #4570 Adjustable Passenger Pegs but for Harley fitment. Has anyone seen this for Victory? Thanks
 

·
Registered
Joined
·
167 Posts
Discussion Starter #2
No Replies

88 views and no replies. I guess there is not an adjustable passenger foot peg for XCT or VV. Aftermarket needs to get busy.
 

·
Registered
Joined
·
2,699 Posts
I'm a little confused but I here are the options:
-You can get the OEM adjustable mounts for floorboards to raise or lower them.
-You can get creative with some Kuryakyn parts for pegs. Kuryakyn parts will have to consist of adapters and offsets -(rotatable up/down/fwd/reverse 2"-4" available). I believe the adapters are the same ones use on a Kingpin and you can get them splined or unsplined but your choice of offset will determine which type to use.
-You can get the same Kuryakyn adapters and some swing wing pegs, pegs with stirrups or mini-floorboards with swing outs that will do what I think you really want to do. Unfortunately I don't think there's anything you can use with the OEM floorboards.
 

·
Registered
Joined
·
12,330 Posts
88 views and no replies. I guess there is not an adjustable passenger foot peg for XCT or VV. Aftermarket needs to get busy.
You're confusing us. Do you want something for floorboards or do you want peg extenders. If the latter, I have installed Kuryakyn's parts.
 

·
Registered
Joined
·
167 Posts
Discussion Starter #5
I will try to take pictures of adjustable passenger pegs that attach to the passenger floorboards. Thanks
 

·
Registered
Joined
·
269 Posts
I don't know what they are called but I have several friends who's passenger floorboards have adjustable passenger pegs that attach to the passenger floorboard and allows the passenger to straighten their legs out or move their feet to another position. In Kuryakyn it is part #4570 Adjustable Passenger Pegs but for Harley fitment. Has anyone seen this for Victory? Thanks
I know exactly what you're talking about. It's a foot peg that can adjust to several different positions that somehow is attached to the passengers floorboards.. It allows the passenger multiple foot positions lower or higher more forward other than just the floor boards.. I've only seen them on Harley's and I believe they are Kuryakyn parts.. I've looked and haven't seen these for the Cross Country.. It would make my wife more comfy.. They can be adjusted on the fly I believe.


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
2,084 Posts
I, too, am not sure exactly what you're looking for, but IF you're interested in adjustable-position passenger mini-floorboards, I'll add this info:

1) On my Valkyrie Interstate, which I owned from 2000-2007, I added Big Bike Parts / Show Chrome adjustable-position passenger mini-floorboards. These replaced the passenger pegs, and allowed about a 3" circle of up/down, fore/aft, and angular adjustment. The rotational parts mated with a serrated edge, so the position was locked in place, once the through-bolt was tightened. Adjustment required an Allen and open-ended wrench, so you didn't want to just change them at a rest stop.

I've attached a pic. And here's the manufacturer's page: http://www.bigbikeparts.com/Inventory/Navision/21-928T . And here's a seller's page: http://www.realhog.com/detail.cfm?Category_ID=55&manufacturer_ID=66&product_ID=26759&model_ID=91&sblid_name=Show_Chrome_Accessories__Big_Bike_Parts__Cruis_Board_System_for_Passenger___Harley_Dyna_Glide_for_Harley_Davidson_Dyna_Glide

2) At the time, I was aware that Rivco made a similar product, but couldn't afford it. Actually, Rivco's product is much slicker, because it allows, I believe, tool-less adjustment, via a spring-and-pin mechanism. You can see some of these near the top of this Rivco page: http://www.rivcoproducts.com/products/home.php?cat=272 . And here are two seller pages, with slight product variations: http://www.realhog.com/detail.cfm?Category_ID=55&manufacturer_ID=11&product_ID=36741&model_ID=94&sblid_name=Rivco_Adjustable_Passenger_Boards_with_Rinehart_Exhaust_for_HD_for_Harley_Davidson_Sportster and http://www.realhog.com/detail.cfm?Category_ID=55&manufacturer_ID=11&product_ID=75066&model_ID=94&sblid_name=Rivco_Adjustable_Classic_Steel_Passenger_Boards_for_Harley_Davidsons_for_Harley_Davidson_Sportster .

3) Kurakyn makes a slew of adapters, pegs, and boards, for both the rider and passenger. Again, here are a couple of examples: http://www.realhog.com/detail.cfm?Category_ID=55&manufacturer_ID=16&product_ID=13153&model_ID=0&sblid_name=Kuryakyn_ISO_Driver_Or_Passenger_Floorboards__Various_Cruiser_Models__Pair_ and http://www.cruisercustomizing.com/kuryakyn-dually-footpegs-with-offset-mounts-and-1-14-inch-clamps-pair/part/KY-7993 .

(Incidentally, I have no personal experience with CruiserCustomizing, but they have a lot of parts. The page I was working from is this: http://motorcycle-accessories.realhog.com/accessories/Passenger Floorboards .)

Now, I have no idea whether BBP, Rivco, or Kury makes stuff directly compatible with Victory mounts, or whether you have to use assorted adapters or possibly even fabricate something. Me, one of the main reasons I bought an XCT -- seriously -- was that it came with adjustable passenger mini-boards. I've played with a few heights and angles in order to suit my wife, and I think we're just about set. Like the BBP boards I had on the Valk, though, these are semi-fixed. IMHO, if you get the Rivco to mount up, this would be nicer, as it does allow easily messing with the setting at a rest or gas stop, should your passenger want to stretch out more, etc.

If you're not looking for this sort of thing, sorry to take up everyone's time.
 

Attachments

1 - 7 of 7 Posts
Top