[Bad-Bolt]

Another angle, looks much better with the bike together. Only 110 bucks into the exhaust, the head pipes are off a newer model, with cats cut off and the have the O2 bosses so I can hook up my wide band sensors

On that note I did not post picks but my son high sided it a couple of months ago, he was fine and the bike took the usual damage; tank, controls mirrors and such..

This is the third time this bike has been down. So I elected not to buy another 07 Hammer S tank. Scored a good tank, Witch Doc, 18x10 rear wheel with a 280 and match front rim for less than a new tank.

Disregard my garage mock up mess.

 

[OhioPatriot308]

Made this video the other day. Practiced launches at 2:50 and 4:00 minute mark


https://youtu.be/3FHbPmyYzWo

 

[TN Black Hammer]

New to the Vic world... after a few weeks of installing my first round of mods, heres a quick look...

Papa Bear where did you get your sissy bar from?

 

[archaicguy]

My Hammer.... I tweak it a little here and there but nothing major, never seem to have much time with vehicle restorations but maybe this winter she will get more attention. I ride her almost daily and can't think of ANY bike that I would rather have.

 

[mobgma]

I will throw one out again

 

[Motorbikerx]

Cool photography of a hot bike.

 

[Krisd]

Nice photos Mobgma thumb up

 

[cobravenomous]

Update.... got those rippers on finally!

Love the look of your bike and the plate is sweet! I live in Ontario and motorcycle plates are limited to five characters and spaces are included in the count. I was thinking of ordering either V HMR or HMR S. Both are still available at a cost of $310 (Canadian). I just recently ordered a 2016 Hammer S and expect delivery mid January.....and although we'll be buried in snow at least I can put it in my garage and view it and wish for an early spring....ha ha

Cobra:laugh

 

[whooshbang]

Some beautiful Hammers in the house.

Guess i should contribute..... my 2009

 

[archaicguy]

My Sledge

2007 S of course. Lotta work, pride and joy in this girl but now I've become intrigued by the XC and considering parting ways if I can get enough for her in sale or trade in.... has 31k miles. Am I crazy in thinking that she is worth 7k ish?

 

[8BallHammer]

I miss my old Hammer

Would love to see it

 

[rumblebox]

New seat...... Finally

Sent from my LG-H910 using Tapatalk

 

[Chezgetssome]

2016 Hammer S was fun stock but now it just is killing it.

Mods
Thirdgearcustoms intake
Norseman perperformance exhaust
Lloydz 1/4, ATS, LSC Cams
Dyno tune from Josh at Coastal Indian
119hp and 118ftlbs made 102ftlbs at 2000rpms

 

[Vhammer284]

New seat...... Finally

Sent from my LG-H910 using Tapatalk

Love the color & 2-1 exhaust


Sent from my iPhone using Tapatalk Pro

 

[CraaagV]

2013 Hammer 8 ball

http://www.victoryforums.com/attachment.php?attachmentid=218457&thumb=1

http://www.victoryforums.com/attachment.php?attachmentid=218449&thumb=1

http://www.victoryforums.com/attachment.php?attachmentid=218465&thumb=1

Bassani road rage 2-1, Platinum air ride, 13/4" burleigh roller bars, renegade 21" wheel conquest customs front fender and 10" wheel with 280 coming soon!

 

[Motorbikerx]

http://www.victoryforums.com/attachment.php?attachmentid=218457&thumb=1

http://www.victoryforums.com/attachment.php?attachmentid=218449&thumb=1

http://www.victoryforums.com/attachment.php?attachmentid=218465&thumb=1

Bassani road rage 2-1, Platinum air ride, 13/4" burleigh roller bars, renegade 21" wheel conquest customs front fender and 10" wheel with 280 coming soon!

ahhh, nice bike!
I see you have the Burleigh Bars 'Roller Bars' same as mine except yours are black and mine polished.
Fantastic bars hey!....are you in OZ or the USA?.....and did you take advantage of the Victory Forum Members discount that I arranged?

 

[CraaagV]

ahhh, nice bike!
I see you have the Burleigh Bars 'Roller Bars' same as mine except yours are black and mine polished.
Fantastic bars hey!....are you in OZ or the USA?.....and did you take advantage of the Victory Forum Members discount that I arranged?

Love these bars! Totally transformed the bike. I am in Canada actually and purchased the bars spring of 2016. Un fortunately I wasn't aware of a discount. They were very very expensive but worth it. There is nothing else like them that thick.

Sent from my SM-G920W8 using Tapatalk

 

[CraaagV]

Love the look of your bike and the plate is sweet! I live in Ontario and motorcycle plates are limited to five characters and spaces are included in the count. I was thinking of ordering either V HMR or HMR S. Both are still available at a cost of $310 (Canadian). I just recently ordered a 2016 Hammer S and expect delivery mid January.....and although we'll be buried in snow at least I can put it in my garage and view it and wish for an early spring....ha ha

Cobra:laugh

Where in Ontario? I'm down in Niagara. Same plate issues as you lol. Everything I want has 6 letters and changing to 5 just doesn't look right. What DoD you end up choosing?

Sent from my SM-G920W8 using Tapatalk

 

[Motorbikerx]

Love these bars! Totally transformed the bike. I am in Canada actually and purchased the bars spring of 2016. Un fortunately I wasn't aware of a discount. They were very very expensive but worth it. There is nothing else like them that thick.

Sent from my SM-G920W8 using Tapatalk

Yeah mate the ULTIMATE! the Ultimate bars for the ultimate bike....originals look like bicycle bars after youve ridden with Burleigh Bars.
The factory is ten minutes up the road from my place, the owner bought the first Victory to sell in our state.
You should have heard him curse Victory when they folded!

 

[CraaagV]

Yeah mate the ULTIMATE! the Ultimate bars for the ultimate bike....originals look like bicycle bars after youve ridden with Burleigh Bars.
The factory is ten minutes up the road from my place, the owner bought the first Victory to sell in our state.
You should have heard him curse Victory when they folded!

Yes pretty fd up decision that's for sure!

Sent from my SM-G920W8 using Tapatalk