Victory Motorcycle Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
Anyone know where I could find the part print out of a slave cylinder on a Jackpot? I'm looking to see the bracket that it attaches to. Any help would be appreciated. Thanks! Chris
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #3 ·
What is the slave cylinder?
"As the name implies, slave cylinders act to lengthen or shorten themselves in response to an actuation pressure command coming from another device (clutch lever), called the master device of the system." On a hydrolic system, its the actutor thats connects inline with the clutch system. I'm not the most mechanically inclined, but I hope that helped explain it.
 

·
Registered
Joined
·
243 Posts
if you look at where the clutch cable connects to the actuator arm

on the rear of the primary cover follow the cable & you will see the slave cylinder. at least thats the location on a vegas / kingpin it shows in my 09 repair manual .



steve
 

·
Registered
Joined
·
173 Posts
Discussion Starter · #7 ·
I have a cable clutch setup and I have to convert to hydrolic for my CCCS controls. Diamond, if it helps, right off the part label, Hydrolic Clutch Slave Cylinder, polaris part# 1911338
 
1 - 7 of 7 Posts
Top