Victory Motorcycle Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
Well I have a little over 11,000 miles on my 2011 vision 8 ball. And realy happy with the bike. But we have a squeaking going on with the bike,when I go to take off letting the cluch out it starts squeaking pull cluch in it stops. The squeaking is louder when bike is still cold. this has been going on now for a while but it seems to be getting louder. any help out there:rolleyes:
 

·
Registered
Joined
·
12,320 Posts
It could be the belt. See related threads/posts.
 

·
Registered
Joined
·
194 Posts
Most likely the belt, especially if its louder when its cold out. Ive heard of others spraying teflon on the belt to reduce this noise...
 

·
Registered
Joined
·
659 Posts
The spray Teflon will help you identify if it is a belt tension/alignment problem. If a couple of squirts quiets it down then you are on the right track. But don't stop there... you still need to figure out why and solve the real problem.
 
1 - 4 of 4 Posts
Top