Victory Motorcycle Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
295 Posts
Discussion Starter #1
Hello. I've searched but couldn't find an answer. I'm looking to install the autotune with the PCV. My question is where to power the autotune. It needs a switched 12v source but not sure where to power it.



Any suggestions?


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
340 Posts
If you look through the install instructions for the PCV (not the AT), you'll notice in one of the pictures that there is an arrow that says "12V Auto Tune" on it. At the very end of the PCV instructions it tells you that the 12V source for the Auto Tune is the Pink wire in the accessory plug shown in that picture. It seems silly that they put this information in the PCV instructions rather than in the AT instructions, but I guess that's because the AT used on our bikes is a generic model as opposed to being brand/model specific.
 

·
Registered
Joined
·
340 Posts
Sorry, missed that. It's in the second picture on the XC instructions, but that doesn't help you any. Lunaticrider just posted up a description and some pictures from his Hammer in the following thread.

http://www.victoryforums.com/showthread.php?t=66953&page=3

His is a 2012, but maybe it's still of some help?
 
1 - 4 of 4 Posts
Top