Victory Motorcycle Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter #1
So it finally happened, after weeks playing and custom cutting a seat pan and constantly placing it on the bike, I guess I banged into the quick disconnect tee enough to crack it. Seems like the male part. Question for those that have dealt with it. Will this work? I'm assuming but not sure, that it needs 1/2" barbed on the lines from the tank, and 3/8" to the female connector?

Pex-Barb-Crimp Fitting Bg : Sharkbite Brass Pex Tee


HydroFLOW Hydro Flow Barbed Reducer Tee Fitting, 1/2 Inch to 3/8 Inch, Bag of 10 | eBay

Thanks in advance.

(This is on the v92c deluxe)
 

·
Moderator
Joined
·
13,090 Posts
go to NAPA they have Tee's take old one to find right size
 

·
Registered
1999 V92C
Joined
·
1 Posts
I received this photo from Ryian Vos at the Vic Shop and it lists all the parts needed to replace quick disconnects and associated parts on my V92C. Order the tee and the male and female disconnects from McMaster-Carr and go to NAPA for the rest, including small screw down clamps to secure the fuel lines at the tank and barb fittings. Also, Ryian Vos at has a 45 minute tutorial video on the early V92c that has good info.
 

Attachments

1 - 3 of 3 Posts
Top