Forum threads, owners manual, or take off gas tank, remove air filter, use throttle body cleaner on closed throttle body using a soft cloth, gently open butterfly, clean again using cleaner ON the Cloth. I would not sprayer cleaner directly in or on throttle body or butterfly. Clean air filter ( I use S&S) replace, replace tank and you are good to go
As long as you bring up manual you can find them here and down load them to your computer. Then you will have the best of both worlds.
Not picking on "you" but from all that I have read every one knows how to ride but are lazy about finding things out about there bike.
True knowledge comes from reading not from hear say.
Has anyone taken their cam tensioners apart? Looking at the Victory parts break down it appears as though they sell the hydraulic tensioner seperate from the body (the large aluminum body thats exposed). I had mine out the other day to double check the timing after my cams. when I pulled the...
The wifey's XC has had a valve train rattle on and off since it was new.
There was a constant tick like a lash adjuster that wasn't completely pumped up. It was there since the bike was first fired up. Everyone hoped it would go away but it didn't.
It got worse over the first 7000 miles...
I'd like to take the front cam tensioner out of my 2014 106 and exchange it with the front cam tensioner in my wife's 2014 106 to see if it corrects a noise noise that comes and goes withher front cylinder valve train.
Here's my question to those familiar with this.
Do I need to pull the...