Victory Motorcycle Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have recently went to start my 2005 victory vegas and when I hit the ignition the bike made a zap noise and all Light and power went out. Now the bike is completely dead it ran p0601 and p1101 I've check the battery the relays and fuses and they are all good.please help
 

·
Registered
Joined
·
16 Posts
I have recently went to start my 2005 victory vegas and when I hit the ignition the bike made a zap noise and all Light and power went out. Now the bike is completely dead it ran p0601 and p1101 I've check the battery the relays and fuses and they are all good.please help
Check and clean your battery connections and replace it if needed.

It sounds like need to do a "Throttle point reset".

Here's how.


  1. Key on, switch on, engine off
  2. Slow 5 count rotate throttle from closed to wide open
  3. Hold throttle wide open for slow 5 count
  4. Let throttle SNAP shut/closed
  5. Cycle kill switch (off then on)
  6. Start bike


Try this and see how it goes. Hope this helps.
 
1 - 2 of 2 Posts
Top