Victory Motorcycle Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter #1
Looking to ditch the 80's style blinker set up. Found a couple of Mirrors with integrated turn signals

https://kiwavmotors.com/en/mirrors/kiwav-arrow-led-turn-signal-mirrors-black-for-harley-davidson-chrome-detail

https://www.amazon.com/Motorcycle-Integrated-1997-Later-2014-Later-Fits2014-later/dp/B01AFU6ATE/ref=sr_1_8?s=automotive&ie=UTF8&qid=1491049438&sr=1-8&keywords=motorcycle+mirrors+with+integrated+turn+signals

I know that they are supposed to be for a Harley, but was wondering if they would fit our bikes or if any of you guys know of some that will.
 

·
Super Moderator
Joined
·
6,371 Posts
I believe @wspollack had a great write-up on this. Due to the nature of the controller, it's not as easy as splicing them into the mains. Which bike do you have?
 

·
Registered
Joined
·
4,064 Posts
Looking to ditch the 80's style blinker set up. Found a couple of Mirrors with integrated turn signals

https://kiwavmotors.com/en/mirrors/kiwav-arrow-led-turn-signal-mirrors-black-for-harley-davidson-chrome-detail

https://www.amazon.com/Motorcycle-Integrated-1997-Later-2014-Later-Fits2014-later/dp/B01AFU6ATE/ref=sr_1_8?s=automotive&ie=UTF8&qid=1491049438&sr=1-8&keywords=motorcycle+mirrors+with+integrated+turn+signals

I know that they are supposed to be for a Harley, but was wondering if they would fit our bikes or if any of you guys know of some that will.
I believe @wspollack had a great write-up on this. Due to the nature of the controller, it's not as easy as splicing them into the mains. Which bike do you have?
Got wspollack's fine work right here:
Adding Rivco LED Mirrors to a Victory Cross Country Motorcycle
 

·
Registered
Joined
·
2,070 Posts
I believe @wspollack had a great write-up on this. Due to the nature of the controller, it's not as easy as splicing them into the mains. Which bike do you have?
Thanks for the compliment, Brogman. The article in question is this one:

Adding Rivco LED Mirrors to a Victory Cross Country Motorcycle

I wrote that almost four years ago, describing my experience adding Rivco mirrors with built-in front- and rear-facing LEDs. The short answer is that I also added a trailer isolator, because the Vic's ECM is such a fuss-budget nanny. The long answer is ... well, that page, which is verrrry long, because I also used that opportunity to discuss some wiring tips and techniques that have helped me over the years.

Now, in this particular case -- those two mirror sets -- I don't know what the deal is with the bottom threads, and left-hand or right-hand, and metric or H-D, etc. That is, there's also a physical element involved here, in addition to the electrical one, and I have no clue regarding that aspect, in terms of fitment.
 

·
Registered
Joined
·
37 Posts
Discussion Starter #6
I believe @wspollack had a great write-up on this. Due to the nature of the controller, it's not as easy as splicing them into the mains. Which bike do you have?
I have a 2016 Gunner

Thank you for your inputs. I will have to do some homework before I make a purchase. Thank you very much.
 
1 - 6 of 6 Posts
Top