Victory Motorcycle Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter #1
I am wiring my 2011 XC for a trailer and cannot get the signal lights to work, they keep cutting out on the bike, then I have to shut off the bike and restart it to but they keep cutting out. Near as I can tell, I need to change the lights from monofilament bulb to LED. Anyone have this problem also?
 

·
Registered
Joined
·
848 Posts
Go to electrical connection or Bushtech and get the Isolator harness. this seporates the bike from the trailer and you should have no more issues.
 

·
Registered
Joined
·
13 Posts
Discussion Starter #3
I was using an isolator, although not from Bushtec. Was able to get brake and taillights, just no turns.
 

·
Registered
Joined
·
848 Posts
Sounds like you have an impeedance or resistance problem... The Isolator usually solves that issue and takes the load off the bike circuts.

Might be the isolator or the connections on the Turn signials
 
1 - 4 of 4 Posts
Top